01.Know how to end the self loading mixer daily?
When clearing the accumulated dirt and residual concrete slag inside and outside the mixing cylinder, as well as when the mechanic enters the cylinder for maintenance and welding operation, the car engine needs to be turned off first to make the mixing cylinder stop rotating completely, specifically how to understand the self priming mixer see below

In the driving speed of course is not as fast as other vehicles driving speed, and according to the road uphill different, the driver should walk according to the road slope situation reasonable loading, in order to safer operation, specific to understand the self loading mixer:, because there is a violation, so the car's center of gravity is not fixed, when the speed is too fast, because of the effect of inertia, self loading mixer can not be timely according to the center of gravity changes, the self loading mixer will not be able to be changed.

02.Will the parts of the self-loading mixer deteriorate?
Self-loading mixer over time, will be prone to corrosion, deterioration and other phenomena, especially after the rain will be particularly serious and obvious, the emergence of this situation will affect what, the following together to understand the following:

Adjustment to a smooth condition, and thus will form a vehicle rollover seizure accident. Our company through a lot of practical verification and cement mixer maximum speed should not be higher than 80km / h. This not only ensures the smoothness of our driving, but also in the sharp turn when there is a safety assurance. In addition, the special cruise control function, in order to ensure the safety of the car together with the use of reduced fuel consumption, fully ensure the interests of customers.

In the early days, we mainly produce wheel loaders, small shovels and other construction machinery, with continuous innovation, research and improvement, the creation of the current self-feeding mixer, quality assurance, if you need to welcome to buy. .

ZLIN GROUP--mainly engaged in the R&D and manufacturing of construction machinery.